Great Plains Logo

Select the Category


you would like to browse:


Home

  • 1237


1237
Evo Cylinder Tools allow installation of
stud to correct height or removal by lock-
ing to stud.
VT No. Item
16-1845 Assembly Tool
16-1846 Extracting Tool
Cylinder Jig Assembly use to repair
stripped damaged cylinder base threads
up to a 4" bore, in engine case. This will
hold centerline and squareness to where
the factory intended them to be. All this
with the engine still in the frame using an
angle head drill (drill not included). Use on
all 1984-99 Big Twin Evo and 1986-up XL.
VT No. 16-0891
Exhaust Stud Drill Fixture fits 1984-up
Ex BT & XL ports to align for drilling of
broken exhaust stud.
VT No. 16-0698
Sifton Dowel Guide Plate is precision
drilled to press cylinder dowels in straight
on 1984-up BT and XL models.
VT No. 16-0837
Head Bolt Torque Gauge for all Evos.
This accurate gauge allows the measur-
ing of 90 when tightening Evo head
bolts. Torquing sequence lasered on
gauge. Use on al 1984-up Evo models.
VT No. 16-0679
Cylinder
Cylinder De-Glazer feature spring action
on the stones keep the stones against the
cylinder wall at the correct pressure.
Capacity 2" to 5
1
/
2
".
16-0610 De-Glazer
16-1759 Set of 3 replacement stones
220 medium grit
16-0607 Stone Set
SPI Hole Micrometers are
used to determine cylinder
bore size (2.80-3.20)
VT No. 16-7433
Piston Ring Grinder accurately sizes end
gap on any piston ring by rotary filing.
VT No. Item
16-0976 Grinder
16-0722 Replacement Cutter File
Piston Ring
Installer with
Safety Stop
insert ring ends
in jaws, then
expand gently
and slip over piston into groove. A simple
time saving tool. Wedge jaw handles 3/64"
to 1/4". Also removes rings without dam-
age.VT No. 16-0628
Multi-Blade Groove Cleaner offers a 1-
piece blade arrangement for 1/16", 5/64",
3/32", 1/8" & 3/16" groove widths. Available
for pistons 2 to 5 inches in diameter. VT
Crankshaft Stabilizer Bracket acts as
third hand. Sliding over crank splines, and
bolting to a primary mount hole prevents
crank from turning while installing pistons,
cylinders or rings.
VT No 16-5051
Ring-O-Matic Ring Compressor has pli-
ers which incorporate precision locking
action for exact holding and quick release.
Includes pliers and 6 bands, size range
from 2 7/8" thru 4 3/8". Complete kit.
VT No. 16-0622
Jims Piston Pin Support Plate provides
a non-marring flat support to push the
bottom of the piston against as rings and
cylinder are installed over piston. Use on
all 1936-up Twins.
VT No. 16-1164
Piston
Jims TC-88 Piston Pin Alignment Tool
use on all TC-88 A or B motors with .927"
diameter wrist pins.
VT No. 16-1148